In this video I continue the Laser Build by installing the Laser Tube Mounts, and the Mirror mounts. I also install the stepper motors to the mounts on the X&Y Axis.
The mechanical parts I am using for this build are from Cloudray Laser https://www.cloudraylaser.com .
The Gas lift struts I ordered from AliExpress here (TYPE-L) http://s.click.aliexpress.com/e/kLLwji4C
The stepper motors I use are Leadshine 573S15-L and 573S09-L (Click Image Links Below For More Info)
The Mechanical parts I used are from Cloudray – This set below is for the size I am building 1300x900mm cutting area. It comes with all mechanical components, laser lens head, mirror mounts, tube mounts stepper motor mounts, axis rails and timing belt.
Cloudray Single Head Linear Guides Complete Set 6040 Incl. Stepper Motor and Driver for CO2 Laser Engraver Cutter DIY – https://amzn.to/2SJ8PiQ
Cloudray Mechanical Parts Set Inner Sliding Rails Kit – https://amzn.to/2XBYzK6
Cloudray Laser Power Supply – https://amzn.to/2LH9uzP
CO2 Laser Tube Holders – https://amzn.to/2XynrXX
Thanks for Visiting.
Until next time, take care
DISCLAIMER: The producer of this video under no circumstances can be found liable for negligence by a viewer if they are seriously injured, dies or suffers damage to their property after acting upon or using the content contained in this video production. Any person/s acting on information contained in this video do so at their own risk. The viewer also acknowledges they must follow all local and national laws and regulations when performing any work described in this video production.